Installation
Shutter does not close correctly if it is installed under tension.
- In order to guarantee the shutter function, only mount the shutter on a flat surface.
- Allow sufficient space to the wall or ceiling.
- Open and align the lamellae of the shutter.
- Mark the 4 drilling positions of the fixing holes, drill and insert the dowels.
- Place the protective grille on the back of the shutter.
- Screw the shutter including the protective grille to the wall with 4 screws.
- To prevent electrostatic charging and thus ensure proper functioning, earth the shutter properly in accordance with the applicable VDE guidelines.
- Run function test.